European Journal of Chemistry

Thermomechanical studies of thermally stable metal-containing epoxy polymers from diglycidyl ether of bisphenol A and amino-thiourea metal complexes



Main Article Content

Sohail Saeed
Naghmana Rashid
Peter Jones
Rizwan Hussain

Abstract

New thermally stable epoxy polymers containing copper and nickel ions have been prepared by curing diglycidyl ether of bisphenol A (DGEBA) with amino-thiourea metal complexes. Characterization of the metal complexes was carried out using infrared spectroscopy, elemental analysis and mass spectrometry. Determination of the optimum value of the epoxy/thiourea metal complex ratio was studied by means of differential scanning calorimetry. This method is based on the search for the maximum enthalpy change. The properties of the resulting metal-containing epoxy polymers were investigated with respect to glass transition temperature, thermal stability, tensile strength, and viscoelastic properties. Introduction of metal ions, especially the copper ion, into the polymer matrices produced polymers with good thermal stability and mechanical properties. The polymer showed good thermal stability compared to the DGEBA-DDM (DDM: 4,4’-diaminodiphenylmethane) system. The copper-containing epoxy polymer obtained at a mole ratio of copper complex:DGEBA (24:100) showed a 2.6% weight loss after heating at 400 °C and had a storage modulus of 6080 MPa at 125 °C, which is comparable to the epoxy-DDM system.

2_1_77_82_800


icon graph This Abstract was viewed 4875 times | icon graph Article PDF downloaded 853 times icon graph Article CIF FILE downloaded 0 times

How to Cite
(1)
Saeed, S.; Rashid, N.; Jones, P.; Hussain, R. Thermomechanical Studies of Thermally Stable Metal-Containing Epoxy Polymers from Diglycidyl Ether of Bisphenol A and Amino-Thiourea Metal Complexes. Eur. J. Chem. 2011, 2, 77-82.

Article Details

Share
Crossref - Scopus - Google - European PMC
References

[1]. Lin, K. F.; Wang, W. H. Polym. Comp. 1995, 16(4), 269-275.
doi:10.1002/pc.750160402

[2]. Lin, K. F.; Shu, W. Y.; Wey, T. L. Polymer 1993, 34(2), 277-288.
doi:10.1016/0032-3861(93)90078-O

[3]. Lin, K. F.; Shu, W. Y.; Wey, T. L. Polymer 1993, 34(10), 2162-2168.
doi:10.1016/0032-3861(93)90745-V

[4]. Anand, M.; Srivastava, A. K. Polym. Eng. Sci. 1997, 37(1), 183-187.
doi:10.1002/pen.11660

[5]. Anand, M.; Srivastava, A. K. Angew. Makromol. Chem. 1994, 219, 1-10.
doi:10.1002/apmc.1994.052190101

[6]. Anand, M.; Srivastava, A. K. J. Appl. Polym. Sci. 1994, 51(2), 203-211.
doi:10.1002/app.1994.070510201

[7]. Anand, M.; Srivastava, A. K. J. Macromol. Sci., Pure Appl. Chem. 1993, A30, 5435-5446.

[8]. Anand, M.; Srivastava, A. K. Polymer 1993, 34(13), 2860-2864.
doi:10.1016/0032-3861(93)90132-T

[9]. Kurnoskin, A. V.; Kanovitch, M. Z.; Ilyin, V. M.; Gusev, L. L.; Bekeshko, V. V. Inf. Bull. Khim. Prom. SEV. 1990, 6, 25-29.

[10]. Kurnoskin, A. V. JMS Rev. Macromol. Chem. Phys. 1996, C36(3), 457-599.

[11]. Chantarasiri, N.; Sutivisedsak, N.; Pouyuan, C. Eur. Poly. J. 2001, 37, 2031-2038.
doi:10.1016/S0014-3057(01)00083-0

[12]. Chantarasiri, N.; Tuntulani, T.; Tongraung, P.; Seangprasertkit-Magee R.; Wannarong W. Eur. Poly. J. 2000, 36, 695-702.
doi:10.1016/S0014-3057(99)00127-5

[13]. Saeed, S.; Rahid, N.; Tahir, A.; Jones, P. G. Acta Cryst. 2009, E65, o1870-o1871.

[14]. Kurnoskin, A. V. Metal-containing epoxy polymers. In: Cheremisinoff, N. P.; Cheremisinoff, P. N., Editors. Handbook of applied polymer processing technology. New York: Marcel Dekker.; 1996. p. 726-742.

[15]. Parshall, G. W.; Ittel, S. D. In: Homogeneous catalysis Wiley, New York (1992), p. 155, 177, 239.

[16]. Saeed, S.; Rahid, N.; Jones, P. G.; Ali, M.; Hussain, R. Eur. J. Med. Chem. 2010, 45, 1323-1331.
doi:10.1016/j.ejmech.2009.12.016
PMid:20056520

[17]. Saeed, S.; Rahid, N.; Jones, P. G.; Hussain, R.; Bhatti, M. H. Cent. Eur. J. Chem. 2010, 8(3), 550-558.
doi:10.2478/s11532-010-0014-2

[18]. Saeed, S.; Rashid, N.; Hussain, R.; Jones, P. G. Acta Cryst. 2009, E65, o2106-o2106.

[19]. Sheldrick, G. M. Acta Cryst. 2008, A64, 112-122.

[20]. Zhang, Y. M.; Pang, H. X.; Cao, C.; Wei, T. A. J. Coord. Chem. 2008, 61, 1663-1670.
doi:10.1080/00958970701615888

[21]. Ozer, C. K.; Arslan, H.; Vanderveer, D.; Binzet, G. J. Coord. Chem. 2009, 62, 266-276.
doi:10.1080/00958970802209623

[22]. Wei, T. B.; Chen, J. C.; Wang, X. C. Synth. Commun. 1996, 26, 1147-1151.
doi:10.1080/00397919608003507

[23]. Illi, V. O. Tetrahedron Lett. 1979, 20, 2431-2435.
doi:10.1016/S0040-4039(01)86311-5

[24]. Arslan, H.; Külcü, N.; Flörke, U. Transition Met. Chem. 2003, 28, 816-819.
doi:10.1023/A:1026064232260

[25]. Mansuroghu, D. S.; Arslan, H.; Külcü, N.; Flörke, U. J. Coord. Chem. 2008, 61, 3134-3146.
doi:10.1080/00958970802010567

[26]. Binzet, G.; Arslan, H.; Külcü, N.; Flörke, U.; Duran, N. J. Coord. Chem. 2006, 59, 1395-1406.
doi:10.1080/00958970500512633

[27]. Ugur, D.; Arslan, H.; Külcü, N. Russ. J. Coord. Chem. 2006, 32, 669-675.
doi:10.1134/S1070328406090089

[28]. Emen, M. F.; Arslan, H.; Külcü, N.; Flörke, U.; Duran, N. Polish J. Chem. 2005, 79, 1615-1626.

[29]. Arslan, H.; Yesilkaynak, T.; Binzet, G.; Emen, F. M.; Flörke, U.; Külcü, N. Eur. J. Chem. 2010, 1(1), 1‐5.
doi:10.5155/eurjchem.1.1.1-5.3

[30]. Saeed, S.; Rashid, N.; Ali, M.; Hussain, M. Eur. J. Chem. 2010, 1(3), 200‐205.
doi:10.5155/eurjchem.1.3.200-205.120

[31]. Saeed, A.; Mumtaz, A.; Flörke, U. Eur. J. Chem. 2010, 1(2), 73‐75.
doi:10.5155/eurjchem.1.2.73-75.34

[32]. Saeed, S.; Rashid, N.; Ali, M.; Hussain, M.; Jones, P. Eur. J. Chem. 2010, 1(3), 221‐227.
doi:10.5155/eurjchem.1.3.221-227.124

[33]. Boinard, P.; Banks, W. M.; Pethrick, R. A. Polymer 2005, 46, 2218-2229.
doi:10.1016/j.polymer.2004.11.103

[34]. Ogata, M.; Kinjo, N.; Kawata, T. J. Appl. Polym. Sci. 1993, 48, 583-587.

[35]. Lee, J. Y.; Jang, J.; Hong, S. M.; Hwang, S. S.; Kim, K. U. Polymer 1998, 39, 6121-6126.
doi:10.1016/S0032-3861(98)00101-3

TrendMD

Dimensions - Altmetric - scite_ - PlumX

Downloads and views

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...
License Terms

License Terms

by-nc

Copyright © 2024 by Authors. This work is published and licensed by Atlanta Publishing House LLC, Atlanta, GA, USA. The full terms of this license are available at https://www.eurjchem.com/index.php/eurjchem/terms and incorporate the Creative Commons Attribution-Non Commercial (CC BY NC) (International, v4.0) License (http://creativecommons.org/licenses/by-nc/4.0). By accessing the work, you hereby accept the Terms. This is an open access article distributed under the terms and conditions of the CC BY NC License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited without any further permission from Atlanta Publishing House LLC (European Journal of Chemistry). No use, distribution, or reproduction is permitted which does not comply with these terms. Permissions for commercial use of this work beyond the scope of the License (https://www.eurjchem.com/index.php/eurjchem/terms) are administered by Atlanta Publishing House LLC (European Journal of Chemistry).